Top 10 Vacuum Cleaner Replacement Filters – Kitchen & Dining Features

As an Amazon Associate I earn from qualifying purchases.

1. POOL BLASTER

#ad

Volt and FX-4 Pool Vacuums by Water Tech, Max, POOL BLASTER Genuine Replacement Xtreme Multilayer Filter Bag for Catfish Ultra, iVac 250, iVAC C2

#ad
POOL BLASTER #ad - Water tech factory components: creates a water-tight seal to the vacuum body, preventing water and dirt from leaking. Manufacturer's genuine pool blaster replacement Xtreme Multilayer Filter Bag part number P30X022XF.

High capacity to fit pool blaster catfish ultra 21001dl/21051dl, ivac 250 25000gl/25050gl, max 30000ml, iVAC C2 IVCF702, Volt FX-4 24000GL/24050GL. For large and small debris: robust construction, twigs, sand, and multiple filtration layers efficiently collect both large and small debris to leave your pool perfectly clean. Traps leaves, quality materials, and silt. Durability & longevity: strong, pressure, reusable filter bag with high-quality mesh and double stitching to withstand wear, and damage during use.
BrandPOOL BLASTER #ad
ManufacturerWater Tech Corp. #ad
Height7.75 Inches
Length4.25 Inches
Width4.25 Inches
Part NumberPBW022XF
ModelP30X022XF

2. poolrccfilters

#ad

Replacement Robotic Pool Cleaner Filter Cartridges, 2 Piece RCX70101PAK2

#ad
poolrccfilters #ad - Replace the filter cartridge into the TigerShark. Hold the filter elements as shown to allow the. Using a garden hose with a spray nozzle, pressure-wash the filter elements to remove debris.

Clean the filter cartridge after each use:place the tigershark on its side. Remember: the cleaner your filter is, the more efficient your unit will perform. Your cartridge is a three piece filter assembly that you may or may not remove the elements Part# RCX70102 for thorough cleaning. Filter cleaning solution can be used to remove D. E. Excessive dirt and/or sand. Release the bottom lid latches and remove the bottom lid assembly. Pull out the filter cartridge. Install bottom lid and slide latches into lock position.
Brandpoolrccfilters #ad
Height14 Inches
Length3 Inches
Width6 Inches
Part Number6598510660

3. POOL BLASTER

#ad

POOL BLASTER Water Tech Max and Catfish Ultra Reusable Sand & Silt Filter Bag

#ad
POOL BLASTER #ad - Water tech factory components: creates a water-tight seal to the vacuum body, preventing water and dirt from leaking. High capacity to fit pool blaster catfish ultra 21001dl/21051dl, ivac 250 25000gl/25050gl, Max 30000ML, ivac c2 ivcf702, Volt FX-4 24000GL/24050GL.

Effective sand removal: finely woven fabric filters out sand, small particles of dirt, silt and, perfecting pool water quality. Manufacturer's genuine pool blaster replacement Sand & Silt Filter Bag part number P30X022SS. Durability & longevity: strong, pressure, reusable filter bag with high-quality mesh and double stitching to withstand wear, and damage during use.
BrandPOOL BLASTER #ad
ManufacturerWater Tech Corp. #ad
Height6.25 Inches
Length4.25 Inches
Weight0.25 Pounds
Width4.25 Inches
Part NumberPBW022SS
ModelP30X022SS

4. Aquatix Pro

#ad

Heavy Duty Pool Vacuum Cleaner/Filter Parts, Full Warranty, Aquatix Pro Premium Compatible Zipper Replacement Bags for Polaris 360 & 380 2pc, Damage Free Enclosure, Easy to Install Leaf Bags

#ad
Aquatix Pro #ad - If you are not satisfied we will refund you the full price, no questions asked! With these, you simply remove the wet/full one and lay it on the patio to dry in the sun and replace it with the other. Super price: unlike other bags on the market which are flimsy, rip easily and have poorly constructed intake mechanism our bags our designed to outperform the original bags.

Once the full one is dry, simply unzip it and everything comes out fairly easily. Our promise: we go the extra mile to ensure you are fully satisfied with your purchase. Why pay more: we provide you bags with incredible quality at prices that put your local stores to shame. Super quality. You will receive 2 high quality bags with enhanced clips for a perfect fit providing you months and months of service. Now you can get your replacement bags directly from us without paying a fortune! Easy on the wallet, relentless in your pool.

Better than velcro: zipper bags are a real game changer. A match in heaven: our premium replacement bags work effortlessly with polaris 360 & 380 Part Part 9-100-1014 or 9-100-1021. Zipper closure. The original has velcro closure that gets gunked up with debris and can be difficult to empty especially when wet. With the aquatix Pro satisfaction promise you get one year warranty on all our products.
BrandAquatix Pro #ad
ManufacturerAquatix Pro #ad
Part Number4336585557

5. PGFUN

#ad

PGFUN 2 Pack 360 380 for Polaris Bags All Purpose Filter Bag for Polaris Replacement Parts for Pool Cleaner

#ad
PGFUN #ad - Zipper design: zipper bags design make it easy to open and cleaner to empty debris than velcro, and just simply pull the zipper that you can empty all the garbage inside the polaris bag. In order to avoid zipper jamming, you best to shake the bag first then pull the zipper). Not suitable for polaris 280 & 480 Nylon cleaner bags: these nylon mesh pool cleaner bags with strong stitching and tights weave, is brilliant on picking up debris or taking in leaves and small twigs without tearing at the bottom of the pool.

If you are not satisfied with our polaris replacement bags in the later period, we will positive adopt it, you can always send us an email and give us your opinion, and we will arrange a full refund or reissue according to your request. Hook and loop fasteners are designed to snap on securely to the hose cleaner and closed tightly at the top. Compatibility: works effortlessly for polaris 360 & 380 9-100-1014 or 9-100-1021 not suitable for pOLARIS 280 & 480 Easy to use: our all purpose filter bag is easy to install, remove and clean.

Enhanced clips is perfect fit for cleaner and user, it can be installed in a seconds! The all purpose filter bag is open on 2 sides, so it is very easy to clean. Not suitable for polaris 280 & 480 Promise: through repeated testing of our polaris replacement bags and investigation of buyers' needs, we continuously improve our bags and successfully make every buyer like our bags.
BrandPGFUN #ad
ManufacturerPGFUN #ad
Model360、380

6. JamBer

#ad

2 Pack, K16, JamBer Nylon Mesh Pool Cleaner Bags,Bag Zipper Replacement for Polaris 280 & 480 Pool Cleaner All Purpose Filter Bag for 280 Polaris Replacement Bags,Pool Cleaner Replacement Part K13

#ad
JamBer #ad - Easy to empty with zipper opening: extra width zipper opening makes this pool mesh bag 3 times easier when emptying and cleaning the debris out of the filter bag. Greatly beats velcro type which is a definite plus for you! Easy on and easy off:these pool sweep bag fits well for Polaris 280/480 bag.

Compatible vacuum cleaner replacement bags: works effortlessly with Polaris 280 & 480 all purpose bag part K13 & K16. Super value of 2 pack filter bags:comes with 2 pcs pool cleaner debris bags, you can switch one out and put clean one back on. In this way the vacuum is down for mere seconds and always have a dry one handy. Easy to install with super sturdy hook and loop fasteners with seconds to remove for cleaning.

Hook and loop fasteners are designed to snap on securely to the hose cleaner and closed tightly at the top. Outstanding quality fine pool mesh bag: these nylon mesh pool cleaner bags with strong stitching and tights weave, is brilliant on picking up debris or taking in leaves and small twigs without tearing at the bottom of the pool.
BrandJamBer #ad
ManufacturerJamBer #ad
Part Number43397-19863

7. DOLPHIN

#ad

Nautilus CC Plus Robotic Pool Vacuum Cleaner Tune-up Kit with Replacement Filters, Brushes, and Tracks, Climbing Rings, DOLPHIN Authentic Replacement Parts

#ad
DOLPHIN #ad - These new parts will help your Dolphin maintain its superior scrubbing capabilities and maintain traction and grip while cleaning your pool’s surfaces. Replacement items and part numbers included: fine filter cartridges 9991433-r4, ultra-Fine Filter Cartridges 9991432-R4, climbing rings 6101611-R4, Grey Brushes 6101641-R2, and Tracks 9985006-R2.

This tune-up kit is compatible with the dolphin Nautilus CC Plus robotic pool cleaner and contains replacement filters, brushes, climbing rings, and tracks to keep your Dolphin in tip-top shape and performing at its optimal level. The fine filters remove larger debris such as leaves and twigs, and the ultra-fine filters will remove the smaller stuff you may not be able to see like dirt and sand. All parts are certified genuine replacement parts manufactured by Maytronics.

Swapping out your dolphin’s old or damaged filters will ensure dirt and debris is captured and removed, leaving your pool water healthy and clean. Wear on these parts can hinder your Dolphin’s cleaning performance. Protect your purchase and robot’s performance by purchasing authentic parts from a Maytronics Authorized Reseller. Keep your dolphin scrubbing and climbing by replacing its brushes, climbing rings, and tracks.
BrandDOLPHIN #ad
ManufacturerMaytronics #ad

8. Aquatix Pro

#ad

Aquatix Pro Premium Compatible Zipper Replacement Bags for Polaris 280 & 480 1pc, Heavy Duty Pool Vacuum Cleaner/Filter Parts, Easy to Install Leaf Bags, Damage Free Enclosure, Full Warranty

#ad
Aquatix Pro #ad - Install with ease and use within seconds! Premium quality: built to a high standard. You will receive 1 premium Bag! Perfect fit: enhanced clips for a perfect and tight fit.

Safe abd secure closure provides complete reliability. If you are not satisfied we will refund you the full price, no questions asked! With the aquatix Pro satisfaction promise you get one year warranty on all our products. Why pay more! our promise: we go the extra mile to ensure you are fully satisfied with your purchase. Affordable: high quality material vacuum bags at a much more affordable price. Compatible: works effortlessly with polaris 280 & 480 Part K13 & K16.
BrandAquatix Pro #ad
ManufacturerAquatix Pro #ad
Part Number4336585546

9. Blue Wave

#ad

Blue Wave Aquafirst & Aquabot Pool Cleaner Replacement Filter Bag

#ad
Blue Wave #ad - 34-quarts maximum debris holding capacity. For use with aqua products aquabot, Pool Rover, AquaMAX Junior and UltraMAX Units. Keep your pool clean without the hassle. Reusable fine micro filter bag for Aqua Products pool cleaners. Easy to remove and clean.
BrandBlue Wave #ad
ManufacturerBlue Wave Products #ad
Height3 Inches
Length6 Inches
Weight0 Pounds
Width6 Inches
Part NumberNE360
ModelNE360
Warrantyno warranty

10. Zodiac

#ad

Zodiac G3 Suction-Side Inground Vacuum Pool Cleaner

#ad
Zodiac #ad - 36-fin disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features. Quiet, powerful suction cleaner; works with low-speed pumps for maximum efficiency.

Devours small and medium-sized debris and cleans floor, walls and steps of your entire pool. Patented quick-Release Cassette provides simplified routine maintenance. Wheel deflector for movement around tight corners. Durable long-life Diaphragm with reliable, one-moving-part-technology. Easy installation. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces. Pool type: In-Ground. Flowkeeper valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps.
BrandZodiac #ad
ManufacturerFluidra #ad
Height0 Inches
Length0 Inches
Weight18.32 Pounds
Width0 Inches
Part NumberW03000
ModelW03000
WarrantyWarranted against manufacturer's defects for 2 years