As an Amazon Associate I earn from qualifying purchases.
1. Marsrock #ad
Original Factory 1400W 12V/24V Off Grid MPPT Wind Solar Hybrid Charge Controller Design for 0- 800W Wind with 0- 600W Solar Panel system with Booster Function and Dump Load #adMarsrock #ad
- 4. Manmachine interface of the controller uses a custom LCD screen and four key operation mode, the user to use simple and easy to use, popular and easy to understand, convenient and quick.3. Discharge part working mode can be set, time control function etc, light control mode, The user can be set up according to the requirements on its own combination.
Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used.
2. In the high wind speed or the wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the stepless unloading function, protection system of the equipment.
5. The controllers with perfect protection function, solar charger, including: lightning counter-attack, over-voltage automatic braking, storage battery reverse connect and open protection, etc.12/24v auto match for 0-800w wind, 0-600w solar system. 1.
2. Pikasola #ad
Pikasola Wind Turbine Charge Controller Mini Wind Turbine Generator Controller IP67 Waterproof 12V/24V Automatic Controller Suitable for 400Watt 500Watt 600Watt Wind Turbine System #adPikasola #ad
- It helps to control wind generator charge battery automatically. 3. Connection-: unique reverse connect protection circuit. 5. Also including lightning protection, automatic over-voltage braking, battery reverse connection and open protection. So wind controller to protect the wind turbine and the battery.
For improper operation of positive and negative electrode, user don't need to replace the fuse, only to reset the positive and negative in correct point. 4. Good heat dissipation-: wind generator charge controller use Aluminum alloy shell and Therming Dissipine Structure with good Heat Dissipation.
Charge controller can work steadily even in very humid environment. 2. Automaticity-: this wind turbine controller can auto match 12/24 system.
When the battery is fully charged, brake can be taken effect automatically by the interior circuit. Meanwhile, it provides the maximum protection to the wind turbine and battery. Protection- the fully waterproof protection which grade reach into IP67 above. When the battery voltage drops to restore voltage level, wind turbine can recover to charge battery automatically. 1. Wind turbine controller-: wind charge controller can be used for 0-600w wind turbine.
3. YWBL-WH #ad
Wind Charge Controller,12V/24V 300W/600W Waterproof Wind Turbine Generator Charge Controller Regulator #adYWBL-WH #ad
- Waterproof:wind turbine controller adapts comprehensive waterproof protection, not easy to be corrosive and get damaged in humid conditions, more reliable. Specification: model: sf-12-24-a rated battery voltage: 12v/24v rated wind turbine power: 300W/600W Working temperature range: -35~75℃ Protection type: IP67 Weight: Approx.
264g/ 9. 3oz. Package list:1 × Wind Turbine Controller. Widly application: wind charge controller is suitable for solar street lamp, small solar power station system, courtyard lamp, and killing lamp, and all kinds of wind power DC power supply system.
Protective function:wind generator controller can automatically identify the voltage 12V or 24V, overload, over-discharge automatic shutdown, full, anti-reverse protection, low-power consumption. With short circuit, recovery and other protection measures.
4. Agatige #ad
FO5‑12/24V 400W Wind Generator Turbine Controller Waterproof Battery Charging Regulator, Agatige Wind Charge Controller #adAgatige #ad
- Applicable power: ≤400w; voltage: dC12-24V; Current A: 10-16. Adopts full sealing completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment.
When the battery is full charged, brake can be controlled automatically by the interior circuit. Make the whole system will be more reliable. The protection grade reaches the IP67 above, even in water can steadily work normally for a long time.
Can control wind turbines to charge the battery automatically. Unique reverse connect protection circuit. Don't need to replace the fuse, only to reset the positive and negative in correct point. When the battery voltage drops to restore voltage level, wind turbine can automatically recove. Easy to install and convenient to use. Voltage and current limiting are be enabled during recharging to ensures the best charging effect.
5. Hongzer #ad
12V/24V 300W/600W Waterproof Wind Turbine Generator Charge Controller Regulator, Wind Turbine Controller #adHongzer #ad
- The led indicates the working state of the circuit, simple, intuitive and clear. With short circuit, over-discharge automatic shutdown, overload, anti-reverse protection, full, recovery and other protection measures. Comprehensive waterproof protection, not easy to be corrosive and get damaged in humid conditions, more reliable.
Automatically identify the voltage 12V or 24V, low-power consumption. Wide application field: suitable for solar street lamp, courtyard lamp, and killing lamp, small solar power station system, and all kinds of wind power DC power supply system.
6. Pikasola #ad
30A Hybrid Charge Controller for Off Grid Max 800W Wind Turbine Charge and 1000W Solar Panel with MCT Charging Function., Pikasola Hybrid Wind Controller and Solar Controller for 12V/24V Battery Auto #adPikasola #ad
- So the controller keep in an optimal heat dissipation state for a long time. Protection function-: over charge voltage/under voltage & Over load voltage Protection, Lightning Protection, battery reverse connects and open circuit protection, etc.
Charge controller for wind and solar can work steadily even in very humid environment. Ip67 waterproof-: the fully waterproof protection which grade reach into IP67.
Especially mct charging function tracks the maximum current of the solar panel in real time. Good heat dissipation-：wind controller use aluminum alloy shell with multi-edge bottom plate design, which increase the heat dissipation area.
Operational system-: the charge controller use pwm technology by MOS tube in series which make solar and wind charge more efficient. Scope of use-: hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind&solar complementary system.
7. MONIPA #ad
MONIPA Wind Turbine Generator 600W DC 24V 5 Blades Lantern Motor Vertical Axis Windmill with Controller #adMONIPA #ad
- Your satisfaction is our ultimate goal. If there is any questions please feel free to contact with us, MONIPA will spare no effort to help you. Parameterrated power: 600w, survival wind speed: 45m/s, rated wind speed: 13m/s, start-up wind speed: 2 m/s, number of blades: 5, rated voltage: 24V, wind wheel diameter:0.
9m, rated wind speed: 12 m/s, leaf material: nylon fiber.
Design lantern motor vertical axis Windmill, wind energy utilization coefficient is high, with the aerodynamic design and optimization of structural design, an increase in generating capacity.
Applicationwind turbine generator For home use, For boat / marine use, For monitoring use, For wind solar hybrid streetlight use. Guaranteethis item will ship from usa, delivery time need about 5-8 days. High performanceour wind turbine features low start up wind speed, small size, high efficiency, low vibration, low noise and beautiful appearance.
8. Vikye #ad
12V/24V 300W/600W Waterproof Wind Turbine Generator Charge Controller Regulator, SF-12-24-A Wind Turbine Controller #adVikye #ad
- Applicable wide application field: suitable for solar street lights, patio lamps and deadly lamps, small solar power plant system and all kinds of wind power DC power supply systems.
Safety protection with short circuit, automatic discharge, anti-reverse protection, total shutdown, overload, recovery and other protection measures.
Waterproof comprehensive waterproof protection, not easy to be corrosive and damaged in wet conditions, more reliable. Automatic identification Automatically identify 12V or 24V voltage, low power consumption. Led indication the led indicates the circuit working status, simple, intuitive and clear.
9. Pikasola #ad
Pikasola Wind Turbine Generator 400W 24V with 3 Blade 2.5m/s Low Wind Speed Starting Wind Turbines with Charge Controller, Windmill for Home #adPikasola #ad
- Real parameter, not false. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. Wind blade: 23. 4inch in length, the more kinetic energy they generate and the more power they produce.
The wind generator is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage. Nylon material waterproof, corrosion resistant, made of nylon carbon fiber.
Wind turbine parameters can be customized, Not False: Our product parameters are Real & Actual, please contact us if you have requirement. Feature: starting with low speed; high wind energy utilization; low vibration on operation, high efficiency.
Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle. The longer the blades are, lightweight. A fully integrated voltage regulator that automatically shuts down when energy is fully charged. Base on designed after repeated experimental testing.
10. MULTIRUTA #ad
MULTIRUTA Wind Turbine Controller CD5.0/24V Wind Turbine Charge Controller Mini Wind Turbine Generator Controller #adMULTIRUTA #ad
- The cd5. 0 wind turbine controller is used to rectify the three-phase alternating current produced by wind turbine to single—phase DC constant current then charge the battery.
Kindly note: always connect the controller to the battery before you connect it to the wind turbine. Input: three-phase alternating current；output: single—phase DC constant current；Rated power: 500 W, Peak power: 750 W. Please check the voltage of your existing wind turbine to use the proper controller.
This model is 24V. The cd5. 0 controller is designed with an electromagnetic brake safety function to prevent the wind turbine’s blade running faster when the wind is much stronger. The controller will be burnt easily if there is no battery in whole system. . It monitors the generator system to protect the battery’s overcharge.