Top 9 PWM Solar Charge Controller 12V – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

#ad
Renogy #ad - Integrated 5v 2a usb ports to charge USB devices. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app. Intelligent protection against reverse polarity, and reverse current. Compact in size makes it easy to install virtually anywhere.

Smart 4-stage pwm charging bulk, Float, Boost, short-circuit, overcharging, and Equalization increases battery life and improves system performance. Backlit lcd screen displays system operation, diverse load control, and error codes. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Capable of charging over-discharged lithium batteries. Power source Type: Solar-Powered.

Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Then secure each cable by rotating the screws clockwise CW to the closed position.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Width3 Inches
Part NumberCharge Controller
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

2. Binen

#ad

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

#ad
Binen #ad - 20a solar charge controller : binen solar charger controller are ul 1741 certified, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Lcd display: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, industrial, suitable for home, commercial etc.

Discharge current: 10A, to support mobile phone chargeing. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, or other batteries. Dual usb output 5V/2. 5a max, the solar charger controller compatibility with 12V 24V system. Easy to install and operate: the charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, low heat production.

Fully 3-stage pwm charge management, reverse protection, improve system efficiency and prolong the life span of the battery. For protecting the lifespan of your battery, lithium, GEL, Liions, it is not suited for nickel hydride, AGM, once the voltage of the battery drop below 8V, the solar controller will turn off automatically. Note: the charge controller will heat up when it is running. Multiple protection functions: binen solar controller has short-circuit protection, open-circuit protection, over-load protection.
BrandBinen #ad
ManufacturerBinen #ad
Weight0.37 Pounds
Part Number4332694907

3. Binen

#ad

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A

#ad
Binen #ad - Multiple protection functions: binen solar controller has short-circuit protection, once the voltage of the battery drop below 8V, open-circuit protection, reverse protection, improve system efficiency and prolong the life span of the battery. For protecting the lifespan of your battery, the solar controller will turn off automatically.

Easy to install and operate: the charge controller should connect the battery first, low heat production. For protecting the lifespan of your battery, over-load protection. Fully 3-stage pwm charge management, the solar controller will turn off automatically. Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet reverse current protection, then the solar panel, well-ventilated place. Note: the charge controller will heat up when it is running. Discharge current: 10A, build-in industrial micro controller, to support mobile phone chargeing.

Lcd display: comes with a display that can clearly indicate the status and data, industrial, suitable for home, it can be conveniently switched modes and parameter configuration, commercial etc.30a solar charge controller : binen solar charger controller are ul 1741 certified, automatically manage the working of solar panel and battery in solar system. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, Liions, lithium, once the voltage of the battery drop below 8V, AGM, it is not suited for nickel hydride, GEL, or other batteries. Dual usb output 5V/2.
BrandBinen #ad
ManufacturerBinen #ad
Height1.97 Inches
Length3.94 Inches
Weight0.44 Pounds
Width1.97 Inches

4. HUINE

#ad

HUINE 20A 12V 24V Auto IP68 Waterproof PWM Solar Charge Controller Solar Panel Battery Intelligent Regulator for Solar System Caravan Boat24 Hours Working Mode

#ad
HUINE #ad - With short cables for connecting with solar panel, battery level, battery and load, and three LED lights can help you to know solar charging status, and load status.

Ip68 rated waterproof, you can use it for solar fencing system, solar monitoring system, this Intelligent 4-stage PWM solar charging controller is suitable for outdoor use, solar lighting system or other solar system. Its small size also can saves you some space. Can automatically senses 12v or 24 Volt for your batteries, working mode of the solar charge regulator is 24 hours. Can extends battery life time. It has short circuit protection, over charge protection, over discharge protection, reverse protection. Easy to mount directly on the frame of the solar panel, with heat sink design at bottom and 2pcs mounting holes.
BrandHUINE #ad
ManufacturerHUINE #ad
Height0.83 Inches
Length3.23 Inches
Weight0.26 Pounds
Width1.77 Inches
Part NumberPD-16540

5. EEEKit

#ad

Multi-Function Adjustable LCD Display with Timer Setting On/Off Hours, 12V24V 30A, EEEKit 30A Solar Charge Controller, Dual USB Port Solar Panel Battery Intelligent Regulator

#ad
EEEKit #ad - Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Reliable protectioneeekit solar charge regulator provides over-current protection, inverse connection protection, low voltage and overcharge protection, short-circuit protection, a reliable protector for your devices.

The solar controller will turn off automatically once the voltage is too low. Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Dual usb 5v/3a output ports support mobile phones, tablet PCs or other devices that require 5V voltage.

Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, AGM, GEL. Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, commercial, suitable for home, industrial, etc.
BrandEEEKit #ad
ManufacturerEEEKit #ad
Height2.5 Inches
Length7 Inches
Width13.5 Inches
Part NumberH026100-E008135338

6. ZEALLIFE

#ad

8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection, ZEALLIFE Solar Panels Charge Controller

#ad
ZEALLIFE #ad - In order to lengthen its service life, the maximum voltage 22V, please do not overload. All-round protection :the product provides overcharge, as well as short-circuit and reverse-connection protection. The controller needs to be connected to a battery to work. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment.

Easy to monitor the led indicator lights:the solar controller integrates two LED lights, over-discharge, overload protection, green fully charged and yellow charging. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller. The product also provides overcharge, as well as short-circuit and reverse-connection protection.

It is suitable for 12V rechargeable batteries. Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries. Advantage 1: it will turn off automatically at night, overload protection, over-discharge, and won’t consume battery power. Advantage 2: if there is connection errors,it will not be damaged. The maximum input of solar energy is 130w:the maximum power of solar panels is130W, and the maximum current 8A. Users don't have to worry about positive + and negative -.
BrandZEALLIFE #ad
ManufacturerZEALLIFE #ad
Height3.9 Inches
Length4.7 Inches
Weight5.9 ounces
Width1.5 Inches
Part NumberSolar Panels Charge Controller 8A
ModelSolar Panels Charge Controller 8A

7. SUNTANT

#ad

ZHCSolar Solar Charge Controller 80A PWM 12V 24V 1920W Solar Panel Charger Discharge Regulator with 5V USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Enhanced Heat Sink

#ad
SUNTANT #ad - Intelligent high-complex protection Technology: Short Circuit Protection, Over-current Protection, Overcharge Protection, Reverse Connection Protection. High charging ability: large power 80 amp solar charge controller, max pv array input voltage/Power Battery Voltage: 24V/960W12V, 12v/24v auto identification, 5V USB output, 48V/1920W24V, Get Free Battery Monitor in the Package.

Abs material shell design: anti-fall & Durable Overall Design, Achieve the Longest Product Service Lifetime. Enhanced heat sink: high-quality aluminum alloy heat sink, simple & easy button operation 2, the thickest Part can Reach to 012 in. Simple operation: 1, super efficient heat Dissipation, Adjustable Charge-Discharge Parameter 4, Operation Mode of Load is Settable.2 years warranty, lifetime Technical Support, 8 Hours Quick Response.
BrandSUNTANT #ad
ManufacturerZHCSolar #ad
Height61 Millimeters
Length188 Millimeters
Weight850 Grams
Width128 Millimeters

8. Renogy

#ad

Compatible with Sealed, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Gel, Flooded and Lithium Batteries

#ad
Renogy #ad - This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Designed to cleanly flush mount on walls, providing a sleek, integrated look. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app.

Any negative connection on the solar module, battery and load can be safely earth grounded as required. 4a usb port on the front display can be used to charge mobile phones, tablets, speakers, etc.55v 2. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. The adventurer is a negative ground controller.

Backlit lcd screen for displaying operating information and error codes. Smart 4 stage pwm charging bulk, float and equalization and temperature compensation increases battery life and improves system performance. An included surface Mount Attachment allows for versatility in mounting. Intelligent protection against: reverse polarity, Boost, overcharging, short-circuit and reverse current.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.45 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

9. Temank

#ad

30A Solar Charge Controller 12V/24V Auto, Solar Panel Battery Controller 30Amp PWM Solar Regulator with Dual USB LCD fit for Small Solar System

#ad
Temank #ad - 30a solar charge controller 12v / 24v auto work; max input voltage: 40v; max pV power 360W /in 12V, 720W / in 24V. With dual 5v / 2A max. Three load work mode settable, 1-23hand 0hboth belong to the light control mode, and the load will turned off at dawn.

Solar charge controller 30 amps only suitable for lead acid batteries: OPEN, Liions, lithium, AGM, GEL, not for nickel hydride, or other batteries. Easy to install and operate: Please always connect the battery before connect the solar panel, only suitable for small home solar system. For protecting the lifespan of your battery, once the voltage of the battery drop below 9V, the solar controller 12V 24V will turn off automatically. 24hload output 24 hours except for battery under voltage 1-23HLoad on after sunset and closed after setting hours turn off load after dawn 0HDusk to dawn the load will turned off at dawn.
BrandTemank #ad
ManufacturerY-SOLAR #ad